GRANTS/FUNDINGS WON BY MECHANICAL ENGINEERING DEPARTMENT

 

Faculty Grants

Sr. PI CO-PI Funding Amount

(PKR)

Nature of Grant Funding Agency Year
1. Dr. Zahid

Anwar

Dr. Shahid

Imran

2.0 Million Faculty

Research

UET

Lahore

2017
2. Dr. Rabia

Shaukat

Dr. Shahid

Imran

2.0 Million Faculty

Research

UET

Lahore

2017
3. Dr. Muhammad

Amjad

Dr. Fahad Noor 1.0 Million Faculty Research UET

Lahore

2019
4. Mr. Adnan

Qamar

1.7 Million Ph.D.

Research

UET

Lahore

2019
5. Dr. Muhammad

Farooq

Dr. Zahid Anwar 2.0 Million Faculty Research UET

Lahore

2019
6. Dr. Shahid

Imran

Dr. Muhammad

Farooq

9.74

Million

NRPU HEC 2020

 

Conference Funding

 

Sr. Sponsor Name Conference

Name

Funding

Amount (PKR)

Nature of

Grant

Year
1. HEC ICEWE-2021 1,156,480/- Sponsorship 2021
2. PHEC ICEWE-2021 770,000/- Sponsorship 2021

Faculty Publications (Journal Articles, Conference Proceedings and Book Chapters)

  1. Korakianitis T, Namasivayam A, Crookes R, Imran S, Ihracska B, Diez A and Malik N. “Compression-ignition engine performance and emissions in single and dual fuelling modes with sustainable fuels.” Proceedings of the IASTED International Conference on Power and Energy Systems and Applications, PESA, 2011
  2. Finite element modelling of a single-particle impact during abrasive waterjet milling, Anwar, D. A. Axinte, and A. A. Becker, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, UK, vol. 225, no. 8, pp. 821-832, 2011
  3. Masood and C.Y.Barlow. Status of solid waste management practices in developing countries a case study on Lahore, Pakistan. Proceedings Venice 2012, Fourth International Symposium on Energy from Biomass and Waste Cini Foundation, Venice, Italy; 12 – 15 November 2012
  4. Book Chapter: V.K.Veera, M.Masood, S.Ruan, N.Swaminathan and H.Kolla. “Modelling of turbulent premixed and partially premixed ” Fluid Dynamics/ Book 1, Ed. H.W.Oh, Korea
  5. Masood and C.Y.Barlow. Status of landfills in developing countries – A case study on Pakistan. Poster presented in 7th Intercontinental Landfill Research Symposium 25- 27 June, 2012, Lulea, Sweden.
  6. F Noor, H Zhang, T Korakianitis, D Wen” Oxidation and ignition of aluminum nanomaterials”Physical Chemistry Chemical Physics 15 (46), 20176-20188, 2013
  7. Anwar, 2013, Evaporative heat transfer with R134a in a vertical mini-channel, Pakistan Journal of Engineering and Applied Sciences, Vol. 13, 101-109.
  8. Anwar, 2013, Dryout characteristics of R134a in a vertical mini-channel, International Journal of Thermal Technologies, Vol. 3, 36-42.
  9. B. Haghighi, M. Saleemi, N. Nikham, Z. Anwar, I. Lumbreras, M. Behi, S. A. Mirmohammadi, H. Poth, R. Khodabandeh, M. S. Toprak, M. Muhammad, B. Palm, 2013, Cooling performance of Nanofluids in a small diameter tube, Experimental Thermal and Fluid Science, Vol. 49, 114-122
  10. Imran, D.R. Emberson, D.S. Wen, A. Diez, R.J. Crookes, T. Korakianitis. “Performance and specific emissions contours of a diesel and RME fueled compression-ignition engine throughout its operating speed and power range.” Applied Energy 111 (2013): 771-777.
  11. Masood and C.Y.Barlow (2013) Framework for integration of informal waste management sector with the formal sector in Pakistan. Waste Management & Research 31(10) Supplement 93–105.
  12. Balazs Ihracska, Dongsheng Wen, Shahid Imran, David Emberson, Lina Maria Ruiz, Roy J. Crookes, Theodosios Korakianitis. “Assessment of elliptic flame front propagation characteristics of hydrogen in an optically accessible spark ignition engine. “International Journal of Hydrogen Energy 38.35 (2013): 15452-15468.
  13. Imran, D.R. Emberson, B. Ihracska, D.S. Wen, R.J. Crookes, T. Korakianitis. “Effect of pilot fuel quantity and type on the performance and emissions of natural gas and hydrogen based combustion in a compression ignition engine.” International Journal of Hydrogen Energy 39.10 (2014): 5163-5175.
  14. F Noor, A Vorozhtsov, M Lerner, D Wen “Exothermic characteristics of aluminum based nanomaterials” Powder Technology, DOI: 1016/j.powtec.2014.12.058
  15. Shahid Imran; David R Emberson; Alvaro Diez; Dongsheng Wen; Roy J Crookes; Theodosios Korakianitis. “Natural gas fueled compression ignition engine performance and emissions maps with diesel and RME pilot fuels.” Applied Energy 124 (2014): 354- 365.
  16. Hussain, K.Case, K.Chatha, S.Imran, M.Imran and T.Masood. “Organizational design: Need for socio- technical inclusive design approach to meet 21st century workforce challenges” , ID 3768, Advances in Human factor and Ergonomics, 5th AHFE Conference, 19 -23 July 2014
  17. Fahad Noor, Zulfiqar Ali, Shahid Imran, Muhammad Sajid Kamran, Maryam “Combustion Characteristics of Reactive Nano-Materials” Journal of Faculty of Engineering and Technology (JFET): 21(2014):147-163
  18. Anwar, I. Ahmed, F. Noor, Z. Ali, S. Imran, S. H. Siyal, T. Sultan, 2014, Flow boiling heat transfer characteristics of R600a and R290 in vertical mini-channels. Journal of Faculty of Engineering and Technology Pakistan.Vol 21, 164-181
  19. Anwar, B. Palm, R. Khodabandeh, 2014, Flow boiling heat transfer and dryout characteristics of R152a in a vertical mini-channel, Experimental Thermal and Fluid Science, Vol. 53, 207-217.
  20. Masood, C.Y.Barlow and D.C.Wilson (2014). An assessment of the current municipal solid waste management system in Lahore, Pakistan. Waste Management & Research 32 (9) 834-847
  21. Masood and C.Y.Barlow.(2014) Contribution for the article “A Glance at the World”. Waste Management 34 837–841
  22. Masood and C.Y.Barlow (2014) Informal waste sector in Lahore: Role & Motivation. Presented in: Second Pakistan Urban Forum (PU-2014), January 12- 14, 2014, Karachi, Pakistan.”
  23. Anwer, I.Ahmed, S.H.Sial, F.Noor, S.Imran, T.Sultan. “Flow boiling heat transfer characteristics of R600a and R290 in vertical mini-channels” Journal of Faculty of Engineering and Technology (JFET): 21(2014):177-189
  24. Shahid Imran, Fahad Noor, Rizwan Shad, Amjad Hussain, Zahid Anwar, Gulzar Ahmad: “Prediction of Heat Release Rate and Engine Emissions Using an Unsteady Flamelet Model Approach for a Compression Ignition Engine” Journal of the Pakistan Institute of Chemical Engineers (JPIChE): 43(2015): 21 – 36
  25. Imran, F. Noor, H. Ali, A. Hussain, Z. Ali, R. Shad “Numerical Analysis of Fin Tip Temperature and Fin Efficiency for Different Fin Geometries and Materials using ABAQUS”. The Nucleus: 52 (2015); 20-24
  26. Fahad Noor, Shahid Imran, Zulfiqar Ali,Amjad Hussain, Hafiz m Ali, Sajid Mehmood”Oxidation Behavior of Nano Aluminum articles in the atmosphere of air and Nitrogen” Journal of the Pakistan Institute of Chemical Engineers (JPIChE) : 43 (2015); 47 – 56
  27. S.Kamran, H.Ali, F.Noor, S.Imran, A.Hussain, H.S.Wang, “Low Reynolds Number Convctive Heat Transfer across a Circular Cylinder with Uniform Volumetric Energy Dissipation” Pakistan Journal of Science : 67( 2015); 45 – 51
  28. Ali, F.Noor, M.S.Kamran, A. Hussain, S.Imran and F.Farrukh, “Condensation Heat Transfer Enhancement using Steam Ethanol Mixtures on a Finned tube”, Pakistan Journal of Science : 67( 2015); 28 – 36
  29. Hussain, Q.W.Ahmad, I.U.Haq, A. Nazir, S.Imran and .U.Islam, “Improvng Productivty and Quality in SMEs of Pakistan, A Case Study ”, Technical Journal Univrsity of Engineering and technology Taxilla: 20(SI) Issue II, 2015: 103 -114
  30. Farhan, F. C. G. A. Nicolleau, and A. F. Nowakowski,“Effect of gravity on clustering patterns and inertial particle attractors in kinematic simulations”, Phys. Rev. E 91,               043021 – Published               29                   April     2015, http://dx.doi.org/10.1103/PhysRevE.91.043021
  31. Shahid Imran, D. R. Emberson, Amjad Hussain, Hassan Ali, R.J.Crookes, T.Korakianitis. “Performance and specific emissions contours throughout the operating range of hydrogen-fueled compression ignition engine with diesel and RME pilot fuels” Alexandria Engineering Journal (2015) 54, 303–314
  32. Theodosios Korakianitis, Shahid Imran, Ngyuen Chung, Hasan Ali, David R Emberson, R J Crookes, “Combustion Response Mapping Procedure for Internal Combustion Engine Emissions” Applied Energy 156 (2015) pp. 149-158)
  33. David R Emberson, Balazs Ihracska ; Shahid Imran; Alvaro Diez; Mike Lancaster; Theodosios Korakianitis Hydraulic Characterization of Diesel and Water Emulsions using Momentum Flux, Fuel Volume 162, 15 December 2015, Pages 23-33
  34. Korakianitis, Shahid Imran, D.R. Emberson, A.M.Namasivayam, R.J. Crookes. “Internal combustion engine performance and emissions aspects when fuelled by conventional and sustainable fuels” included in the Handbook of Clean energy Systems, Volume 2 ISBN: 978-1-118-38858-7
  35. Anwar, B. Palm, R. Khodabandeh, Flow boiling heat transfer and dryout characteristics of R600a in a vertical mini-channel, 2015, Vol. 36 of Journal of Heat Transfer Engineering.
  36. F Noor, D Wen “Experimental study of thermal oxidation of nanoscale alloys of aluminium and zinc (nAlZn)” Journal of Physics and Chemistry of Solids, DOI: 10.1016/j.jpcs.2015.05.004
  37. F Noor, A Vorozhtsov, M Lerner, E Bandarra Filho, D Wen “Thermal-Chemical Characteristics of Al-Cu Alloy Nanoparticles” The Journal of Physical Chemistry C, 119(25), 2015
  38. Z Ali, F Noor, K Shahzad “PERFORMANCE COMPARISON OF COAL SPIRAL CIRCUIT ALTERNATIVES” Journal of the Pakistan Institute of Chemical Engineers 43 (1), 37-46, 2015
  39. Amjad, M, F Fazal, F Noor, A Qamar, and M 2015. “Performance Investigation of a Screw Turbine Operating Under Low Head and Less Flow Rate Requirement.” Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan 20(SI) (II(S)): 166–70.
  40. Farooq, M. Amjad, A. Qamar, F. Noor, A. Yousaf, Experimental Investigation of Performance Characteristics of Diesel Engine Using Biodiesel Blends Prepared With Ethanol. Journal of Faculty of Engineering and Technology, 2015, Vol. 22, Issue 1
  41. Qamar, M. Farooq, M. Amjad, M. S. Syed, A. Yousaf, Performance Analysis of a Directly Coupled Solar Powered Thermoelectric Refrigeration System. Journal of Faculty of Engineering and Technology, 2015, Vol. 22, Issue 1
  42. Amjad, F. Fazal, F. Noor, A. Qamar, M. Farooq, Performance Investigation of a Screw Turbine Operating Under Low Head & Less Flow Rate Requirement. Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan, 2015, Vol. 20(SI) No.II(S).
  43. Anwar, B. Palm, R. Khodabandeh, 2015, Flow boiling heat transfer, pressure drop and dryout characteristics of R1234yf in a vertical mini-channel. Experimental Thermal and Fluid Science, Vol 66, 137-149.
  44. Anwar, B. Palm, R. Khodabandeh, 2015, Dryout characteristics of natural and synthetic refrigerants in vertical mini-channels. Experimental Thermal and Fluid Science, Vol 68, 257-267.
  45. ASIM, M. S. KAMRAN, M. FAROOQ, M. AMJAD, A. QAMAR, MODELLING OF OPTIMIZED STAND-ALONE PV SYSTEM FOR BASIC DOMESTIC ENERGY USE IN PAKISTAN; Journal of Faculty of Engineering & Technology Vol 22, No. 2 (2015).
  46. A. Siddiqui, N. Hayat, M. Farhan, M. Farooq, H. Bilal; Effect of phase angle on the efficiency of beta type Stirling engine. Journal of Faculty of Engineering and Technology. Vol 22, No 2 (2015)
  47. Asim, S. Kamran, M. Farooq M. Amjad, A. Qamar, Modelling of optimized Stand- Alone PV System for basic domestic energy use in Pakistan. Journal of Faculty of Engineering and Technology. Vol 22, No 2 (2015)
  48. Farooq J. M. Andersen, Upgrading of bio-gas into bio-methane by regenerative activated carbon. Journal of Fundamentals of Renewable Energy and Applications, 2015, Vol. 5, Issue 5. International Conference of Bio-fuels & Bio- energy, Aug 25-27, 2015 Valencia, Spain.
  49. Farooq A. H. Bell, M. N. Almustapha, N. A. Abd Rahman, J. M. Andresen, Process Viability of Activated Carbon Adsorption For Low Cost Bio-Methane Production Using Aspen Process Economic Analyzer. International Mechanical Engineering Congress and Exposition. IMECE-2015 Houston, Texas, USA
  50. Bilal, A.H. Alami, M. Farooq, H. U. Mughal, Feasibility and Economic Analysis of Green Solution for Clean Water to Arid and Remote Areas, 3rd International Conference on Water, Energy and Environment (ICWEE), UAE-2015.
  51. Funke, M. Abbas, N. Dhamen 2015, Upgrading of Solid Fast Pyrolysis By- Products for Material Use with High Value, ECI Conference, Biorefinery I: Chemicals and Materials from Thermo-Chemical Biomass Conversion and Related Processes at Chania (Crete), Greece.
  52. Qamar, M. Farooq, M. Amjad, H. Bilal, M. M. Sultan, Experimental Investigation of Heat Sink Configuration Effect on the COP of Thermoelectric Refrigeration System for Storage of Polio Vaccine; Journal of Faculty of Engineering & Technology Vol 23, 1 (2016).
  53. Funke, A. Niebel, D. Richter, M.M. Abbas, A.-K. Muller, S. Radloff, M. Paneru, J. Maier, N. Dhamen, J. Sauer 2015, Fast Pyrolysis char- Assesment of alternative uses within the bioliq® concept; Bioresourse Technology 200 (2016) 905-913.
  54. Amjad, M., Fazal, F., Noor, F., Qamar, A., & Farooq, M. (2015). Performance investigation of a screw turbine operating under low head and less flow rate requirement. Technical Journal. UET Taxila, Pakistan,
  55. Qamar, A., Farooq, M., Amjad, M., Syed, M. S., & Yousaf, A. (2015). Performance Analysis of a Directly Coupled Solar Powered  Thermoelectric  Refrigeration System. JOURNAL OF FACULTY OF ENGINEERING & TECHNOLOGY, 22(1), 157- 169.
  56. FAROOQ, M., Amjad, M., Qamar, A., Noor, F., & Yousaf, A. (2015). EXPERIMENTAL ANALYSIS OF PERFORMANCE CHARACTERISTICS OF DIESEL ENGINE USING BIODIESEL  BLENDS  PREPARED  WITH ETHANOL. JOURNAL OF FACULTY OF ENGINEERING & TECHNOLOGY, 22(1), 147-156.
  57. Qamar, A., Farooq, M., Amjad, M., Syed, M. S., & Yousaf, A. (2015). Performance Analysis of a Directly Coupled Solar Powered  Thermoelectric  Refrigeration System. JOURNAL OF FACULTY OF ENGINEERING & TECHNOLOGY, 22(1), 157- 169.
  58. ASIM, , KAMRAN, M. S., FAROOQ, M., AMJAD, M., & QAMAR, A. (2015). Modelling Of Optimized Stand-Alone Pv System For Basic Domestic Energy Use In Pakistan. Journal of Faculty of Engineering & Technology, 22(2), 61-68.
  59. Qamar, A., Farooq, M., Amjad, M., Bilal, H., & Sultan, M. M. (2009). Effect of Heat Sink Configuration on the COP of Thermoelectric Vaccine Journal of Faculty of Engineering & Technology, 23(1), 33-43.
  60. Kanan, , Asim, M., Amjad, M., Kumar, R., & Farooq, M. (2016). Salt Gradient Solar Pond Heat Transfer Model for Lahore. University of Engineering and Technology Taxila. Technical Journal, 21(1), 83.
  61. Farooq, M., Qamar, A., Asim, M., Siddiqui, F. A., Amjad, M., & Yousaf, A. (2016). Design and analysis of packed bed activated carbon reactor for the enrichment of biogas. University of Engineering and Technology Taxila. Technical Journal, 21(1), 58.
  62. Hayat, A., Amjad, M., Mufti, N. A., & Shoaib, M. (2016). Parametric Investigation of a Form Tool Wear and Dimensional Inaccuracy in Turning Operation of AISI The Nucleus, 53(3), 188-194.
  63. Qamar, A., Farooq, M., Amjad, M., Bilal, H., & Sultan, M. M. (2009). Effect of Heat Sink Configuration on the COP of Thermoelectric Vaccine Refrigerator. Journal of Faculty of Engineering & Technology, 23(1), 33-43.
  64. Akhtar, , Qamar, A., Farooq, M., Amjad, M., & Asim, M. (2016). DEVELOPMENT OF AN EFFECTIVE ENERGY MANAGEMENT SYSTEM IN POWER PLANTS OF PAKISTAN. JOURNAL OF FACULTY OF ENGINEERING & TECHNOLOGY, 23(2), 77-87.
  65. Martins, , Mendoza, O. S. H., Amjad, M., & Bandarra Filho, E. P. (2016). Geometric optimization of radiative heat transfer on surfaces of corrugated furnaces. Applied Thermal Engineering, 104, 344-357.
  66. Raza, G., Amjad, M., Kaur, I., & Wen, D. (2016). Stability and aggregation kinetics of titania nanomaterials under environmentally realistic conditions. Environmental science & technology, 50(16), 8462-8472.
  67. Jin, H., Lin, G., Bai, L., Amjad, M., Bandarra Filho, E. P., & Wen, D. (2016). Photothermal conversion efficiency of nanofluids: An experimental and numerical study. Solar Energy, 139, 278-289.
  68. Akbar, M. S., Qamar, A., Amjad, M., Farooq, M., & Fazal, F. (2016). Hydro-Elastic Analysis of Marine Components Using MATLAB and Finite Element Analysis Techniques. NUST Journal of Engineering Sciences, 9(2), 76-82.
  69. Amjad, M., Qamar, A., Asim, M., Farooq, M., & Raza, G. (2017). Gravity Assisted Water Filtration Model for Flood Affected Areas of Pakistan: An Experimental University of Engineering and Technology Taxila. Technical Journal, 22(1), 61.
  70. Zhang, M., Xu, C., Du, X., Amjad, M., & Wen, D. (2017). Off-design performance of concentrated solar heat and coal double-source boiler power generation with thermocline energy storage. Applied Energy, 189, 697-710.
  71. Zhang, M., Xu, C., Du, X., Amjad, M., & Wen, D. (2017). Off-design performance of concentrated solar heat and coal double-source boiler power generation with thermocline energy storage. Applied Energy, 189, 697-710.
  72. Lasfargues, M., Stead, G., Amjad, M., Ding, Y., & Wen, D. (2017). In Situ production of copper oxide nanoparticles in a binary molten salt for concentrated solar power plant applications. Materials, 10(5),
  73. Amjad, M., Yang, Y., Raza, G., Gao, H., Zhang, J., Zhou, L., … & Wen, D. (2017). Deposition pattern and tracer particle motion of evaporating multi-component sessile droplets. Journal of colloid and interface science, 506, 83-92.
  74. Amjad, , Raza, G., Xin, Y., Pervaiz, S., Xu, J., Du, X., & Wen, D. (2017). Volumetric solar heating and steam generation via gold nanofluids. Applied Energy, 206, 393-400.
  75. Luo, Y., Du, X., Yang, L., Xu, C., & Amjad, M. (2017). Impacts of solar multiple on the performance of direct steam generation solar power tower plant with integrated thermal storage. Frontiers in Energy, 11(4), 461-471.
  76. Amjad, , Jin, H., Du, X., & Wen, D. (2018). Experimental photothermal performance of nanofluids under concentrated solar flux. Solar Energy Materials  and  Solar Cells, 182, 255-262.
  77. Amjad, M., Gardy, J., Hassanpour, A., & Wen, D. (2018). Novel draw solution for forward osmosis based solar desalination. Applied Energy, 230, 220-231.
  78. Beicker, C. L., Amjad, M., Bandarra Filho, E. P., & Wen, D. (2018). Experimental study of photothermal conversion using  gold/water  and  MWCNT/water  Solar Energy Materials and Solar Cells, 188, 51-65.
  79. He, Z., Wang, X., Du, X., Amjad, M., Yang, L., & Xu, C. (2019). Experiments on comparative performance of water thermocline storage tank with and without encapsulated paraffin wax packed bed. Applied Thermal Engineering, 147, 188-197.
  80. Qamar, A., Arshad, A., Anwar, Z., Shaukat, R., Amjad, M., Imran, S., … & Korakianitis, (2020). Dispersion stability and rheological characteristics of water and ethylene glycol based zinc oxide nanofluids. Thermal Science, (00), 187-187.
  81. Nawaz, S., Kashif, M., Abbas, N., Farooq, M., Farhan, M., Amjad, M., … & Naqvi, (2020). Effect of defocused plane on entrance and exit hole geometry of high grade steel 18CrNi8  during  percussion  drilling  by  Nd: YAG   millisecond   laser system. Materials Research Express, 7(1),
  82. Kashif, , Awan, M. B., Nawaz, S., Amjad, M., Talib, B., Farooq, M., … & Rehan, (2020). Untapped renewable energy potential of crop residues in Pakistan: Challenges and future directions. Journal of Environmental Management, 256, 109924.
  83. Farooq, M., & Andresen, J. (2015, July). Regeneration of Activated Carbon Using Electric Potential for Upgrading Bio-Gas to Bio-Methane. In  ECS  Meeting Abstracts (No. 3, p. 628). IOP
  84. Bilal, , Alami, A. H., Farooq, M., Qamar, A., & Siddiqui, F. A. (2016). The Economic Analysis of Portable Photo-Voltaic Reverse Osmosis (PVRO) System. University of Engineering and Technology Taxila. Technical Journal, 21(2), 19.
  85. Zahid, , Qadir, A., Farooq, M., Zaheer, M. A., Qamar, A., & Zeeshan, H. M. A. (2016). Design and Analysis of Prototype Tesla Turbine for  Power  Generation  Applications. Tech. J. Univ. Eng. Technol. Taxila, 21, 1-6.
  86. Shah, A. N., Mir, F., & Farooq, M. (2016). An Optimized Thermal Analysis of Electronic Unit Used in Aircraft. Pakistan Journal of Engineering and Applied Sciences.
  87. Wang, T., Yu, W., Liu, F., Fang, M., Farooq, M., & Luo, Z. (2016). Enhanced CO2 absorption and desorption by monoethanolamine (MEA)-based nanoparticle suspensions. Industrial & Engineering Chemistry Research, 55(28), 7830-7838.
  88. Chaudhary, N., Shah, F. H., Farooq, M., & Qamar, A. (2016). ENHANCEMENT IN OVERALL THERMAL EFFICIENCY OF A GAS TURBINE POWER PLANT USING COMBINED CYCLE SYSTEM. JOURNAL OF FACULTY OF ENGINEERING & TECHNOLOGY, 23(2), 49-57.
  89. Akbar, M. S., Qamar, A., Amjad, M., Farooq, M., & Fazal, F. (2016). Hydro-Elastic Analysis of Marine Components Using MATLAB and Finite Element Analysis Techniques. NUST Journal of Engineering Sciences, 9(2), 76-82.
  90. Farooq, M., Abbasi, B., Ali, A., & Islam, N. U. (2017). EFFECT OF HYPOMAGNESEMIA ON CONTROL OF DIABETES AND LIPID
  91. Almustapha, N., Farooq, M., & Andresen, J. M. (2017). Sulphated zirconia catalysed conversion of high density polyethylene to value-added products using a fixed-bed reactor. Journal of Analytical and Applied Pyrolysis, 125, 296-303.
  92. Farooq, M., Bell, A. H., Almustapha, M. N., & Andresen, J. M. (2017). Bio-methane from an-aerobic digestion using activated carbon adsorption. Anaerobe, 46, 33-40.
  93. Imran, M., Pambudi, N. A., & Farooq, M. (2017). Thermal and hydraulic optimization of plate heat exchanger using multi objective genetic Case studies in thermal engineering, 10, 570-578.
  94. Farooq, M., Almustapha, M. N., Imran, M., Saeed, M. A., & Andresen, J. M. (2018). In-situ regeneration of activated carbon with electric potential swing desorption (EPSD) for the H2S removal from biogas. Bioresource technology, 249, 125-131.
  95. Imran, , Korakianitis, T., Shaukat, R., Farooq, M., Condoor, S., & Jayaram, S. (2018). Experimentally tested performance and emissions advantages of using natural-gas and hydrogen fuel mixture with diesel and rapeseed methyl ester as pilot fuels. Applied Energy, 229, 1260-1268.
  96. Farooq, M., Asim, M., Imran, M., Imran, S., Ahmad, J., & Younis, M. R. (2018). Mapping past, current and future energy research trend in Pakistan: a scientometric assessment. Scientometrics, 117(3), 1733-1753.
  97. , , ‘Coagulation-flocculation for lignin removal from wastewater – A review’, Water Science and Technolgy      (2014)      69                        (8):                1589–1597. https://doi.org/10.2166/wst.2013.768
  98. Nawaz, A., Shahbaz, M.A. and Javed, M., ‘Management of organic content in municipal solid waste – a case study of Lahore’, Int. J. Environment and Waste Management, 2015 Vol. 15, No. 1, pp.15–23. DOI: 1504/IJEWM.2015.066946
  99. Shahbaz, M. A., Jüngst, N. Grzeszik, R., Kaiser, S. A., ‘Endoscopic fuel film, chemiluminescence, and soot incandescence imaging in a direct-injection spark- ignition engine’, Proceedings of the Combustion Institute, 2020.
  100. Shahbaz, A., Goschütz, M., Kaiser, S.A., ‘Endoscopic anisole-LIF imaging of flame propagation and temperature fluctuations in a production SI engine’, Proceedings of the European combustion meeting, 2017.
  101. Goschütz, M., Shahbaz, M. A., Shawal, S., Kaiser, S.A., ‘Endoscopic visualization of the early premixed flame kernel in an SI engine by high-speed chemiluminescence imaging and tracer-LIF’, 13th International Congress of Engine Combustion Processes: Current Problems and Modern Techniques (ENCOM), 2017. https://doi.org/10.1007/s00170-018-03244-2
  102. Uddin, G. M., Khan, A. A., Ghufran, M., Tahir, Z. U. R., Asim, M., Sagheer, M., … & Waseem, B. (2018). Experimental study of tribological and mechanical properties of TiN coating  on  AISI  52100  bearing    Advances  in   Mechanical  Engineering, 10(9),1687814018802882. https://doi.org/10.1177/1687814018802882
  103. Uddin, G. M., Khan, A. A., Ghufran, M., Tahir, Z. U. R., Asim, M., Sagheer, M., … & Waseem, B. (2018). Experimental study of tribological and mechanical properties of TiN coating  on  AISI  52100  bearing    Advances  in   Mechanical  Engineering, 10(9),1687814018802882. https://doi.org/10.1177/1687814018802882
  104. Uddin, G. M., Sajid Kamran, M., Ahmad, J., Ghufran, M., Asim, M., Qasim Zafar, M., & Zeid, I. (2018). Comparative Experimental Study of Tribo-Mechanical Performance of Low-Temperature PVD Based TiN Coated PRCL Systems for Diesel Engine. Advances in Tribology, https://doi.org/10.1155/2018/9437815
  105. Ghufran M., Uddin G.M., Khan A.A., Hussein H., Khurshid K., Arafat S.M. (2019) Comparative Experimental Investigation of Mechanical Properties and Adhesion of Low Temperature PVD Coated TiO2 Thin Films. In: Gapiński B., Szostak M., Ivanov V. (eds) Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering. Springer, Cham https://doi.org/10.1007/978-3-030-16943-5_38
  106. Khan, Hasan Izhar, Naiqiang Zhang, Weiqiao Xu, Zhongliang Zhu, Dongfang Jiang, and Hong Xu. “Effect of maximum stress intensity factor, loading mode, and temperature on corrosion fatigue cracking behavior of Inconel 617 in supercritical water.” International Journal of Fatigue 118 (2019): 22-34.
  107. Khan, Hasan Izhar, Naiqiang Zhang, Zhongliang Zhu, Dongfang Jiang, Tahir Asif, and Hong Xu. “Behavior and susceptibility to stress corrosion cracking of a nickel‐based alloy in superheated steam and supercritical water.” Materials and Corrosion 70, no. 1 (2019): 48-56.
  108. Zhu, Zhongliang, Hasan Izhar Khan, Qi Cao, and Naiqiang “Oxidation Behavior of Ferritic Steel T22 Exposed to Supercritical Water.” High Temperature Materials and Processes 38, no. 2019 (2019): 476-484.
  109. Zhu, Zhongliang, Hong Xu, Hasan Izhar Khan, Dongfang Jiang, and Naiqiang Zhang. “Effect of exposure temperature on oxidation of austenitic steel HR3C in supercritical water.” Oxidation of Metals 91, no. 1 (2019): 77-93.
  110. Zhu, Zhongliang, Yi Cheng, Bo Xiao, Hasan Izhar Khan, Hong Xu, and Naiqiang Zhang.”Corrosion behavior of ferritic and ferritic-martensitic steels in supercritical carbon dioxide.” Energy 175 (2019): 1075-1084.
  111. Zhu, Zhongliang, Dongfang Jiang, Qi Cao, Hong Xu, Hasan Izhar Khan, and Naiqiang Zhang. “Oxidation behavior of austenitic steel Sanicro25 and TP347HFG in supercritical water.” Materials and Corrosion 70, no. 6 (2019): 1087-1098.
  112. Muhammad Bilal Awan ; Tanveer Iqbal ; Saima Yasin ; Saad Nawaz ; Chaudhry Haider Ali, Techno-economic sustainability analysis of biomass fired industrial boiler: Biomass evolution as heat and power generation source, IET Renewable Power Generation, ISSN 1752-1424, Volume 4(13), pp650-658, 18th March
  113. Umair Naseem, Muhammad Bilal Awan, Baber Saeed, Naseem Abbas, Saad Nawaz, Muzamil Hussaind, Experimental investigation of flow instabilities in a wide gap turbulent rotating Taylor-Couette flow, Case Studies in Thermal Engineering, Volume 14, September 2019, 100449.
  114. Shahbaz, A, Kaiser, S.A., Schütte, M., Berg, T., ‘Characterization of UV endoscopic imaging systems for combustion applications.’, Proceedings of the European combustion meeting, 2019.
  115. Uddin, G. M., Jawad, M., Ghufran, M., Saleem, M. W., Raza, M. A., Rehman, Z. U., & Waseem, B. (2019). Experimental investigation of tribo-mechanical and chemical properties of TiN PVD coating on titanium substrate for biomedical implants manufacturing. The  International  Journal  of  Advanced  Manufacturing  Technology, 102(5-8), 1391-1404.nanofluids,                      Accepted in Thermal Science Journal, 2020, https://doi.org/10.2298/TSCI200110187Q
  116.  Qamar Adnan, Arshad Attique, Anwar Zahid, Shaukat Rabia, Amjad Muhammad, Imran Shahid, Razzaq Luqman, Ali Muhammad, Korakianitis Theodosios, Dispersion stability and rheological characteristics of water and ethylene glycol based zinc oxide
  117. Rabia Shaukat, Muhammad Sajid Kamran, Shahid Imran, Zahid Anwar, Hassan Ali, Numerical investigation of melting heat transfer during microencapsulated phase change slurry flow in microchannels, Journal of Enhanced Heat Transfer, 2019, Vol. 26, 551-575
  118. Younis, M. R., Farooq, M., Imran, M., Kazim, A. H., & Shabbir, A. (2019). Characterization of the viscosity of bio-oil produced by fast pyrolysis of the wheat straw. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-16.
  119. Saeed, M. A., Farooq, M., Andrews, G. E., Phylaktou, H. N., & Gibbs, B. M. (2019). Ignition sensitivity of different compositional wood pellets and particle size dependence. Journal of environmental management, 232, 789-795.
  120. Umair Munir, Asad Naeem Shah, Syed Asad Raza Gardezi, Zahid Anwar, Muhammad Sajid Kamran, Oscillatory heat transfer correlation for annular mini channel stirling heater, Case Studies in Thermal Engineering, 2020, Vol. 21, https://doi.org/10.1016/j.csite.2020.100664
  121. Nawaz, A., Ahmed, Z., Shahbaz, A., Khan, , Javed R. Ranjan, F. Riaz, P. S. Lee, and S. K. Chou, “VAPORIZING LIQUID MICROTHRUSTER TESTING UNDER PULSED MODE OPERATION,” in 11th International Conference on Applied Energy, 2019, Aug 12-15, Västerås, Sweden, 2020.http://www.energy-proceedings.org/vaporizing-liquid-microthruster-testing-under-pulsed-mode- operation/
  122. Riaz, P. S. Lee, and S. K. Chou, “Thermodynamic design of very low-grade heat driven ejector refrigeration system for tropical climate,” Applied Thermal Engineering, 2019 https://doi.org/10.1016/j.applthermaleng.2019.114710
  123. RIAZ, P. S. LEE, and S. K. CHOU, “ Thermodynamic Analysis of a Novel Ejector Enhanced Vapour Compression Cycle Driven by Electricity and Low-Grade Heat,” SusTEM2019, 5th Internatioal Conference on Sustainale Thermal Energy, Hangzhou China, 2019
  124. RIAZ, P. S. LEE, and S. K. CHOU, “Low-Grade Heat Driven Novel Hybrid System to Produce Power and Cooling,” PCT international PATENT number WO/2019/231400, Dec 2019.
  125. Shaukat, M. S. Kamran, S. Imran, Z. Anwar, H. Ali, 2019, Numerical investigation of melting heat transfer during microencapsulated phase change slurry flow in microchannels, Journal of Enhanced Heat Transfer. Vol. 26, 551-575,
  126. Zhu, Zhongliang, Ruitao Li, Xiao Liu, Hasan Izhar Khan, Hong Xu, and Naiqiang Zhang. “The characterization of oxide scales formed on ferritic-martensitic steel in supercritical water with dissolved oxygen.” Corrosion Science (2020): 108810
  127. Usman, M., Farooq, M., Naqvi, M., Saleem, M. W., Hussain, J., Naqvi, S. R., … & Anukam, A. (2020). Use of gasoline, LPG and LPG-HHO blend in SI engine: A comparative performance   for   emission    control    and    sustainable   Processes, 8(1), 74.
  128. Nawaz, S., Kashif, M., Abbas, N., Farooq, M., Farhan, M., Amjad, M., … & Naqvi, R.A. (2020). Effect of defocused plane on entrance and exit hole geometry of high grade steel 18CrNi8 during  percussion  drilling  by  Nd:  YAG   millisecond   laser system. Materials Research Express, 7(1),
  129. Farooq, M., Hamayoun, A., Naqvi, M., Nawaz, S., Usman, M., Naqvi, S. R., … & Pettinau, A. (2020). Thermodynamic performance analysis of hydrofluoroolefins (HFO) refrigerants in commercial air-conditioning systems for sustainable environment. Processes, 8(2), 187
  130. Muzamil Hussain,  Rizwan  Ali  Naqvi,  Naseem   Abbas,   Shahzad   Masood   Khan, Saad Nawaz, Arif Hussain, Nida Zahra, Muhammad Waqas Khalid, Ultra-High- Molecular-Weight-Polyethylene (UHMWPE) as a promising polymer material for biomedical applications: A review of recent advances MDPI Polymers, 4 February 2020, 12(2), 323.
  131. Ali Rehman, Muhammad Abdul Qyyum, Ashfaq Ahmad, Saad Nawaz, Moonyong Lee, Li Wang, Performance Enhancement of Nitrogen Dual Expander and Single Mixed Refrigerant LNG Processes Using Jaya Optimization Approach, MDPI Energies June 25, 2020, 13(12), 3278.
  132. Kashif, M., Awan, M. B., Nawaz, S., Amjad, M., Talib, B., Farooq, M., … & Rehan, M. (2020). Untapped renewable energy potential of crop residues in Pakistan: Challenges and future directions. Journal of Environmental Management, 256, 109924.
  133. Arslan, M., Farooq, M., Naqvi, M., Sultan, U., Tahir, Z. U. R., Nawaz, S., … & Chaudhry, I. A. (2020). Impact of varying load conditions and cooling energy comparison of a double-inlet pulse tube refrigerator. Processes, 8(3), 352.
  134. Ghufran M, Uddin GM, Arafat SM, Jawad M, Rehman A. Development and tribo- mechanical properties of functional ternary nitride coatings: Applications-based comprehensive review. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2020 Jun 11:1350650120933412. https://doi.org/10.1177/1350650120933412
  135. Zafar MQ, Uddin GM, Asim M, Khan AA, Tahir ZU, Hayat N, Ghufran M, Jawad M. Comparative analysis of low-temperature PVD-based TiN nano-thin-film-coated and- uncoated TNMG inserts in dry Journal of the Chinese Institute of Engineers. 2020 Feb 17;43(2):143-52. https://doi.org/10.1080/02533839.2019.1694438
  136. Adnan Qamar, Attique Arshad, Zahid Anwar, Rabia Shaukat, Muhammad Amjad, Shahid Imran, Luqman Razzaq, Muhammad Ali, Theodosios Korakianitis, Dispersion Stability and Rheological Characteristics of Water and Ethylene Glycol based Zinc Oxide Nanofluids, Thermal Science, Accepted for Publication, 2020
  137. Adnan Qamar, Zahid Anwar, Hassan Ali, Rabia Shaukat, Shahid Imran, Attique Arshad, Hafiz Muhammad Ali, Theodosios Korakianitis, Preparation and dispersion stability of aqueous metal oxide nanofluids for potential heat transfer applications: A review of experimental studies, Journal of Thermal Analysis and Calorimetry, Accepted for publication, 2020
  138. Performance analysis of direct absorption-based parabolic trough solar collector using hybrid nanofluidsA Khalil, M Amjad, F Noor, A Hussain, S Nawaz, EP Bandarra Filho, X Du Journal of the Brazilian Society of Mechanical Sciences and Engineering 42(2020)
  139. Untapped renewable energy potential of crop residues in Pakistan: Challenges and future directions M Kashif, MB Awan, S Nawaz, M Amjad, B Talib, M Farooq, AS Nizami, …Journal of Environmental Management 256, 109924 20 2020
  140. Effect of defocused plane on entrance and exit hole geometry of high grade steel 18CrNi8 during percussion drilling by Nd: YAG millisecond laser system S Nawaz, M Kashif, N Abbas, M Farooq, M Farhan, M Amjad, F Noor, …Materials Research Express 7 (1), 016556 2 2020
  141. Maximising Yield and Engine Efficiency Using Optimised Waste Cooking Oil BiodieselL Razzaq, S Imran, Z Anwar, M Farooq, MM Abbas, H Mehmood Khan, …Energies 13 (22), 5941 4 2020
  142. Performance Evaluation of a Direct Absorption Collector for Solar Thermal Energy Conversion A Sattar, M Farooq, M Amjad, MA Saeed, S Nawaz, MA Mujtaba, S Anwar, Energies 13 (18), 4956 2 2020
  143. Dispersion stability and rheological characteristics of water and ethylene glycol based zinc oxide nanofluids A Qamar, A Arshad, Z Anwar, R Shaukat, M Amjad, S Imran, L Razzaq, Thermal Science, 187-187 2020
  144. Experiments on comparative performance of water thermocline storage tank with and without encapsulated paraffin wax packed bedZ He, X Wang, X Du, M Amjad, L Yang, C XuM. Asim, Z. Anwar, M. Farooq, R. Shaukat, S. Imran, M. Abbas, Flow boiling heat transfer characteristics of low GWP refrigerants in a vertical mini channel, 2020, Thermal Science, (https://doi.org/10.2298/TSCI200601327A)
  145. Razzaq, S. Imran, Z. Anwar, M. Farooq, Z. Rehman, M. M. Abbas, H. M. Khan, T. Asif, M. Amjad, M. E. M. Soudagar, N. Shaukat, I. M. R. Fattah, S. M. A. Rahman, 2020, Maximising Yield and Engine Efficiency Using Optimised Waste Cooking Oil Biodiesel, Energies, Vol. 13 (22).
  146. Munir. A. N. Shah, S. A. R. Gardezi, Z. Anwar, M. S. Kamran, 2020, Oscillatory heat transfer correlation for annular mini channel stirling heater, Case Studies in Thermal Engineering, Vol. 21, (https://doi.org/10.1016/j.csite.2020.100664)
  147. Munir, M. K. Sajid, A. N. Shah, M. Farhan, Z. Anwar, 2020, CFD methodology for simulating pumping loss from displacer and piston seals of free piston Stirling engine, Thermal Science, (https://doi.org/10.2298/TSCI200408295M)
  148. F Riaz, PS Lee, “Novel Ejector-Compressor Refrigeration Cycle Driven By Low-Grade Heat And Electricity” PATEN filed with Singapore Registry of Patents on October 09, 2020, SG-Patent 10202010035R, NUS-ILO ref 2020-120-01
  149. Riaz, K. H. Tan, M. Farooq, M. Imran, P. S. Lee, “Energy Analysis of a Novel Ejector-Compressor Cooling Cycle Driven by Electricity and Heat (Waste Heat or Solar Energy)”, Sustainability 2020, 12(19), 8178;
  150. Riaz, P. S. Lee, R. Ranjan, and S. K. Chou, “ANALYSIS OF A LOW- TEMPERATURE HEAT DRIVEN VAPOUR COMPRESSION COOLING SYSTEM INCORPORATING A SUPER-SONIC EJECTOR,” in 11th International Conference on Applied Energy, 2019, Aug 12-15, Västerås, Sweden, 2020.http://www.energy- proceedings.org/analysis-of-a-low-temperature-heat-driven-vapour-compression- cooling-system-incorporating-a-super-sonic-ejector/
  151. Biomass waste utilization for adsorbent preparation in CO2 capture and sustainable environment applicationsH Mumtaz, M Farhan, M Amjad, F Riaz, AH Kazim, M Sultan, M Farooq, …Sustainable Energy Technologies and Assessments 46, 101288 2021
  152. Nanomaterials for solar energy capture and steam generationM Amjad, MA Haruna, J GardyEmerging Nanotechnologies for Renewable Energy, 37-48 2021
  153. Nanocomposites for enhanced oil recoveryMA Haruna, M Amjad, SM Magami Emerging Nanotechnologies for Renewable Energy, 81-113 2021
  154. Performance investigation of a solar thermal collector based on nanostructured energy materialsM Zain, M Amjad, M Farooq, Z Anwar, R Shoukat, EP Bandarra Filho, …Frontiers in Materials 7, 462 2021
  155. Ashraf, W.M.; Uddin, G.M.; Farooq, M.; Riaz, F.; Ahmad, H.A…., “Construction of Operational Data-Driven Power Curve of a Generator by Industry 4.0 Data Analytics”. Energies 2021, 14, 1227. https://doi.org/10.3390/en14051227
  156. Muhammad Rizwan Awan, Hernan Gonzalez Rojas, Saqib Hameed, Fahid Riaz, “Design Of Optimum Cutting Conditions Through Artificial Intelligence To Reduce Energy Consumption In Abrasive Cut Off Operation”, International Conference on Energy, Water and Environment – ICEWE-2021, ISBN: 978-969- 23447-1-5, 2021 https://conferences.uet.edu.pk/icewe/2021/book-of-abstracts/
  157. Muhammad Usama Mujeeb, Muhammad Amjad, Hifsa Shahid, Fahad Noor, Fahid Riaz, Zahid Nahis, “Energy Optimization Of A Nanofluid Based Hybrid Photovoltaic Thermal System Using Dual Buck-Boost Converter”, International Conference on Energy, Water and Environment – ICEWE-2021, ISBN: 978-969- 23447-1-5, 2021 https://conferences.uet.edu.pk/icewe/2021/book-of-abstracts/